Table of Content
I thought a reset would help, so I deleted Lutron from Google Home. When configured, the Lutron Caséta integration will automatically discover the currently supported devices as set up in the Lutron Smart Bridge. The name assigned in the Lutron mobile app will be used to form the entity_id used in Home Assistant. E.g., a dimmer called ‘Lamp’ in a room called ‘Bedroom’ becomes light.bedroom_lamp in Home Assistant. Rapidly tap the top “on” button three times and on the third tap hold until the lights connected to the switch begin to dim up and down, immediately tap the top “on” button three times rapidly. The connected lights will then alternate dim and bright slowly.
Instead, it uses its own mesh network protocol to connect to a dedicated hub. I don't have anything by Lutron so I don't know exactly how this works, but if all of the devices are connected through a single account or hub, you may try unlinking and relinking it. Devices can also be added to rooms and scenes, so you can control a whole room with one command, or set the lights just right for a certain setting, like watching a movie. Those who own Lutron Caseta switches and controllers will tell you that they are among the best and most reliable. I’ve seen people that have more than forth Caseta devices, and they can all be controlled using Google Assistant through Google Home and Google Nest speakers.
How to setup Google Home with Caséta/RA2 Select
The Lutron Caseta scene platform allows you to control your Smart Bridge Scenes that are created in the Lutron mobile app. For non-dimmable lights or switched loads, see the switch section on this page. You can already ask Siri or Alexa to turn your Lutron smart lights on and off — starting today, you can use Google Assistant, too. Starting today, Lutron Caseta Wireless customers will be able to ask the Google Assistant to turn individual lights or groups of lights on and off, or to dim or brighten them.
First follow the instructions for the general Lutron Caseta integration above. Now that you have all your Lutron Caseta devices connected, you may be wondering what commands you can use. When controlling your devices with your voice, you will use the naming that you have chosen in the Google Home app. Google Home is engineered with far-field voice recognition, so your commands to “dim the lights” and activate your pre-programmed scenes are heard over the noise and from across the room. Lutron Caseta isn’t compatible with Z-Wave or ZigBee smart hubs because it operates on a different radio frequency.
Expand your Smart Home System
The Smart Bridge connects your Caseta devices to the internet and enables usage of the Lutron app. Caseta uses its own proprietary wireless communication, called Clear Connect, so it cannot connect directly to Wi-Fi. It takes just a few minutes to install your Caséta Wireless lighting control system.

For example, a light called ‘Bedroom Lamp’ will appear in Home Assistant as light.bedroom_lamp. Plus Google Home gives you access to the power of Google Search. After setup, fans will appear in Home Assistant using an entity_id based on the name used in the Lutron mobile app. For example, a light switch called ‘Master Bedroom Ceiling Fan’ will appear in Home Assistant as fan.master_bedroom_ceiling_fan. Schedule lights and shades to adjust automatically at set times of day. Turn on your porch light at sunset and turn it off at sunrise.
Cover
Close will change the tilt so they are as shut as they can be. Interest will be charged to your account from the purchase date if the balance is not paid in full within 6 months. Right now the only way is to have separate accounts and log in/out. I cannot find any documentation or posts related to using the app to control two homes. Obviously, Apple's "Home" app can do it and i could use that, but think that the Lutron app should support multiple locations.

Setup your Google Assistant enabled device, download the Google Home app, and connect it to your Wi-Fi network. Enable the “Caséta Wireless” service in the Google Home app to sync your devices with the Google Assistant. Install your Caséta system, connect it to your Wi-Fi router, and download the Lutron App. This step only applies if you have multiple homes setup on your account. As only one home is supported through a single Google Home account at this time.
Similar to this post
This website may contain user-submitted content and is for informational use only. Lutron disclaims any and all liability for the accuracy and correctness of content and conduct of any third parties in connection with or related to your use of the site. Note that for shades, only an absolute level can be specified; cannot raise or lower shades by a relative amount. Sends Google a list of all Google-eligible devices that are currently on the user's account. For blinds, saying open or close will control the tilt, or the angle, of the blinds. Open will tilt the blinds so they are parallel with the ground.

Connecting Google Home to Caséta lighting controls allows you to manage your smart home with voice commands to change the lighting, control the shades, adjust the temperature and DJ the music. Your smart home is now voice activated, so just say the word. My Lutron Caseta system stopped responding to voice commands through google assistant.
For more information on working with buttons in Home Assistant, see the Buttons integration. Button Entities are created for each Keypad button and Pico Remote button present within the system. Radio RA3 and HomeWorks QSX systems can use these button entities to activate scenes that are defined within the Lutron system. Occupancy groups will appear in Home Assistant using an entity_id based on the area name in which the first sensor of the group is located.

These voice commands are used to control the Lutron Caseta Fan Speed Control. The Google Home app will take you back to the setup screen. You will need to exit out of the setup process and go to the home screen to see the devices. The Smart Hub and App for Caséta are the perfect foundations for creating a connected home system. Monitor and control lights from anywhere, so you can always be in touch with your home. For dimmable lights including wall and plug-in dimmers, see the light section on this page.
If I press add device and press Lutron Caseta in the Home app it just says "Unlink account" and doesn't seem to have any way to update it with new lights. For example, it it’s time to watch a big game or a movie on TV, Lutron and Google Assistant can make sure the lighting is just right by asking Google to set the scene. Google assistant can then tell your Lutron Serena shades to lower and our Lutron dimmer switches to lower the lights so there is no glare on the TV. After setup, dimmable lights including wall and plug-in dimmers will appear in Home Assistant using an entity_id based on the name used in the Lutron mobile app.

However, Lutron systems report occupancy and vacancy statuses only in occupancy groups – that is, groups of one or more sensors. If you already have caseta.key, caseta.crt, caseta-bridge.crt, and cannot physically access the bridge to press the button, pairing can be done by utilizing these existing files. This integration supports the Caséta, RA2 Select, RadioRA 3, and Homeworks QSX lines of products.
Hi all, I have Lutron Caseta connected to Google Home, so it shows 10 lights. I just installed 3 more, and added them to the Lutron app but Google Home doesn't show them. Tried restarting, refreshing, I can't get them to show up.

For example, one or more sensors in the Master Bathroom will appear in Home Assistant as binary_sensor.master_bathroom_occupancy. Scenes are not directly supported on RA3 and QSX models, however the button platform can be used to activate scenes for these systems. Lutron Caséta can be auto-discovered by Home Assistant. If an instance was found, it will be shown as “Discovered”, which you can select to set it up right away. A hands-free Smart Home begins with Google Home connected to a Caséta Smart Hub, turning your voice into a Smart Home command center. Selecting any of the retailer links will redirect you from a Lutron operated website to a site operated by that retailer.
No comments:
Post a Comment